Edge · Edge Gateways
LBVS100 Smart Boundary Post
Industry terminal for nature-reserve boundaries, forestry protection and unattended outdoor patrols.
Role in the loop
Boundary-state sensing: whether the post is in place, hit or approached, with exceptions entering the patrol alarm loop.
Specification
Capability scope
The following describes capability. Ranges, accuracy, port counts, power and operating temperature are confirmed against the current selection sheet — request the one for your scenario.
- 01
- Structure: outdoor all-in-one post in a solar boundary-post housing
- 02
- Positioning: GNSS, GPS / BeiDou
- 03
- Attitude: tilt angle and shock events
- 04
- Approach: external PIR probe
- 05
- Environment: temperature and humidity; up to 3× RS485 reserved
- 06
- Interlock: IR, shock or tilt can trigger voice and camera snapshot
- 07
- Comms: LoRa terminal with Mesh; 4G uplink; Bluetooth on-site maintenance
- 08
- Power: solar, Li-ion and supercap; charge/discharge can be monitored
- 09
- Low power: sleeps after tasks, wakes on IR, shock or timer; holds off near 30% battery
- 10
- 12 V loads such as the camera start per task and power off when done
FAQ
About LBVS100
Is LBVS100 a gateway or a complete boundary post?
It is an outdoor all-in-one smart-boundary-post controller in a solar-powered post — not a cabinet or DIN-rail gateway. Housing size and IP rating follow the project mechanical version.
How does the post reach the platform?
Routine status and alarms can hop over a LoRa mesh to a gateway, then uplink by 4G or microwave; the terminal itself also supports 4G and Bluetooth on-site maintenance. Solar, camera, LoRa and 4G parts follow the project hardware version.
What happens on approach, impact or tilt?
When PIR, shock or tilt crosses the threshold, the post can alarm over LoRa / 4G and play voice plus take a snapshot. The camera powers off when the task ends, to keep peak draw down.