Expand · Expansion Modules
SDS30 Integrated Slave Module
IO expansion for a smart gateway, covering environment points and access control on one module.
Role in the loop
Extends channel count so scattered digital, analog and serial devices join one acquisition system.
Specification
Capability scope
The following describes capability. Ranges, accuracy, port counts, power and operating temperature are confirmed against the current selection sheet — request the one for your scenario.
- 01
- CPU: ARM32/Cortex-M3, imported and domestic versions
- 02
- RTOS: FreeRTOS
- 03
- Storage: 4 MB
- 04
- Comms: RS485 or RS232
- 05
- Digital inputs: 24, dry contact
- 06
- Analogue inputs: 8, dry contact, 0–5 V, 4–20 mA, 0–20 mA and TTL
- 07
- Dry-contact relays: 4, 3 A, NO/NC, AC250V
- 08
- Powered relays: 4, 10 A, NO/NC, output follows the supply, typically for access locks
- 09
- Powered normally-open relay: 1, 10 A, output follows the supply, typically for sounders
- 10
- Northbound RS485: 1 port, 1200–115200 baud
- 11
- Southbound RS485: 1 port, 1200–115200 baud
- 12
- RS485 capacity: up to 16 bus modules
- 13
- Offline records: up to 100,000
- 14
- Debug: 1× Console (RS232), 3-wire terminal
- 15
- Debug tool: dedicated configuration tool
- 16
- Supply: DC 12–36 V
- 17
- Rated power: 3.5 W self-consumption, including 12 relay drives
- 18
- Mounting: DIN rail or fixing holes inside the enclosure
- 19
- Size: 250×110×60 mm
- 20
- Operating temperature: -20–60 °C
- 21
- Humidity: RH 5%–95%, non-condensing
Where it is used